Table of Contents
Discovering and Resolving Why Apple Pencil 2 Showing Charge Fail with 10 possible Reasons and Solutions in this detailed guide.
Introduction
Apple Pencil 2 has become the must have accessory for many iPad users allowing taking notes in notes, sketching with satisfactory results and getting creative in many different ways. Perhaps, charging problems with this device are quite frequent. Whether it’s a faulty connection, software glitch or hardware problem knowing the possible reasons behind your Apple Pencil 2 not charging is essential for resolving the problem effectively. In the following article, we will walk through different diagnostics and fixing methods to deal with your Apple Pencil 2 charging issues.
Why Apple Pencil 2 Showing Charge Fail
If your Apple Pencil 2 is displaying a “charge fail” message or experiencing issues with charging, start by ensuring it’s securely connected to your iPad via the magnetic attachment. Clean both the connector on the Apple Pencil and the iPad to remove any dirt or debris that could be obstructing the connection.
Try restarting both devices and ensuring they have the latest software updates installed. If the problem persists, reset the Bluetooth settings on your iPad or try charging the Apple Pencil from a different power source. Inspect the Apple Pencil for any physical damage, and if none of these steps resolve the issue, contact Apple Support for further assistance or consider visiting an Apple Store for professional help. Click here to buy new apple pencil
Possible Reasons Why Your Apple Pencil 2 May not be Charging
Physical Damage:
Damage to Apple Pencil 2, i.e. cracks, dents or bent connectors, can cause charging problem.
Faulty Connection:
The connection between the Apple Pencil 2 and the iPad’s charging port may be too loose or unstable which may prevent charging from initiating or successfully completing. Click here to buy a new Apple pencil 2 charging cable
Debris or Obstruction:
There might be dust, lint or debris in the charging port of iPad or Lightning connector of Pencil that could interrupt the charging process.
Software Glitches:
Software issues or old iPad firmware can interfere in pencil-to-iPad communication, causing charging problems.
Low Battery Level:
Should the level of battery of the Apple Pencil 2 is dreadfully low, it likely does not have enough power to start the charging process.
Magnetic Interference:
The magnets or accessories are in the magnetic field or even near the Apple Pencil 2 and the iPad may interrupt the magnetic connection to charge.
Extreme Temperatures:
The Apple Pencil 2 battery will be damaged and its charging will be inefficient when heated or chilled excessively.
Compatibility Issues:
Compatibility issues between the Apple Pencil 2 and the iPad type may fail the pencil to charge correctly.
Battery Optimization Settings:
Some battery optimization settings on the iPad such as Low Power Mode or background app refresh restrictions can restrain charging of accessories connected to the iPad.
Hardware Malfunction:
In certain rare instances hardware failures may occur within the Apple Pencil 2 or the iPad’s charging circuitry that result in charging issues.
How To Fix Them Here are Solutions
Physical Damage:
Solution:
In the case of physical damage to Apple Pencil 2, like cracks or bent connectors, go to Apple Support or authorized service provider for repair or replacement options.
Faulty Connection:
Solution:
Make sure that the Apple Pencil 2 is firmly resting over the magnetic charging area on the side of your iPad. If the connection feels loose, take it out and reconnect it tightly to make it very snug. Also, attempt charging the pencil with a different iPad to rule out any problems with the first device.
Debris or Obstruction:
Solution:
Clean the charging port of your iPad and the Lightning connector on the Apple Pencil 2 with a soft brush or compressed air. Eliminate any dust, lint or debris that may prevent charging connection.
Software Glitches:
Solution:
Allocate the latest version of their respective operating systems to your iPad and Apple Pencil 2. Another thing that you could try is restarting on both devices which could reset temporary software bugs that could be affecting the power charging process.
Low Battery Level:
Solution:
Hook up your Apple Pencil 2 on the iPad to charge for a long while. It may take some while for the pencil to gather a sufficient amount of charge to be turned on, particularly if the battery level is considered to be critical
Extreme Temperatures:
Solution:
Charge your Apple Pencil 2 in moderate temperatures to achieve optimal performance and battery lifespan. Stay away from charging in extremely warm or cold settings.
Compatibility Issues:
Solution:
Make sure your iPad model is among the models that support Apple Pencil 2. Consult Apple’s official documentation or website for compatibility related information. In case required, upgrade to a suitable device.
Battery Optimization Settings:
Solution:
Turn off battery optimization settings on your iPad that prevent charging for connected accessories. Turn off such features Low Power Mode and Background App Refresh Restrictions.
Hardware Malfunction:
Solution:
If none of other troubleshooting steps help you with the charging problem, then contact Apple Support or visit a local service provider for help. Hardware may require professional diagnostics and repair to remedy the hardware failures.
Some Possible Reasons, and how to fix them About Apple Pencil 2.
Inspect the Charging Components:
Before going into software-based solutions, we need to investigate the physical components engaged in charging your Apple Pencil 2. First, closely examine the Lightning connector on the pencil and the charging port on the iPad. Search for any damages signs, e.g. bent pins, corrosion or debris accumulation. Even the smallest objection can disrupt the charge. In case you observe any damage or dirt, gently clean the affected areas using a soft brush or compressed air. Make sure that the port of the iPad for charging and the connecter of the pencil are clean and unblocked beforehand.
Ensure Proper Connection:
If the Pencil 2 does ln some way or other come off from iPad, the charging may be hindered to occur First off, make sure that the pencil is properly locked into the magnetic charging area on the side of your iPad. You should distinctly hear a click when the pencil fits right. If the fitting seems to be loose or unstable, pull the pencil out and reattach it more firmly so that it is tight. Besides that, also see what happens when you charge the pencil with some other iPad (if it is available) in order to eliminate any problems that are device-specific.
Check for Software Updates:
Software bugs or old firmware sometimes block the charging of your Apple Pencil 2. To overcome this, ensure that both your iPad and Apple Pencil 2 are running the latest version of their respective operating systems. Go to the Settings app on your iPad and from there select “General” hovered by “Software Update” to check for available updates. If an update is available, download and install it, turn off your iPad and then try charging your Apple Pencil 2 again. Click here to buy a new magnetic wireless charging dock
Restart Your iPad and Apple Pencil 2:
A soft reset on both your iPad and Apple Pencil 2 generally may solve your charging issues since both of them may perform a software refresh and clear temporary glitches. To restart your iPad tap and hold the power button until “slide to power off” slider appears, and then slide it to turn your device off.
Power off your iPad then press and hold the power button until the Apple logo appears to restart it. Also, restart the Apple Pencil 2 by pulling it off from the magnetic charging spot on your iPad, and then fix it on the iPad. You can also do that on your iPad. You would just have to open the Bluetooth settings and look for Apple Pencil 2 in the list of devices, so that you can select “Forget This Device” and re-pair the pencil.
Try a Different Charging Method:
If you still observe charging related problems, consider utilizing the alternative charging method to detect potential issues related to your current configuration. Switch to a different Lightning cable and USB power adapter to charge your iPad and Apple Pencil 2, both certified and safe according to Apple. Also, opt for a compatible wireless charging pad for your Apple Pencil 2 to use the wireless charging method. Correctly place the pencil on the charging pad to start the charging cycle and check its status.
Contact Apple Support:
There are instances where all the troubleshooting steps won’t help to resolve the charging problem, it can be that the hardware of Apple Pencil 2 is the cause of the issue. If you’ve tried everything possible, do not hesitate to Apple Support or take your device to an authorized service provider for additional help. They can definitely perform a complete evaluation of your device to offer you either repair or replace services.
Check for Physical Damage:
Test with Another Charging Cable:
Lightning cable malfunctioning may be a cause of charging problems. You may also want to charge your Apple Pencil 2 using another Lightning cable to rule out this possibility. If possible, use an Apple-certified cable, since third-party cables can’t guarantee the same reliability. If the pencil charges successfully when a different cable is used, it implies that the original cable is probably faulty and must be replaced.
Reset Your iPad’s Settings:
A factory reset can solve the problem if the slowness of charging is caused by a software issue. Remember that after this the options on your iPad concerning the network, the privacy, and the accessibility will be reset to default. To reset all the settings of your iPad, go to Settings > General > Reset and select ‘Reset All Settings.’ Confirm and enter your passcode if prompted. The reset process is completed now, reboot your iPad, and try charging your Apple Pencil 2 again.
Verify Apple Pencil Compatibility:
Make sure that your Apple Pencil 2 is suitable with your iPad model. The Apple Pencil 2 is compatible with some iPad models only. Check whether your iPad is compatible with Apple Pencil 2 from Apple’s official website or documentation. If your iPad model is not compatible with the Apple Pencil 2, then it is advisable that you consider upgrading to a compatible device so as to use the features of the pencil.
Update iPad’s Charging Settings:
The iPad charging can be adjusted which can help the charging issues of the Apple Pencil 2. First, go to Settings > Battery on your iPad. Turn off “Low Power Mode” since it may restrict charging of the accessories such as the Apple Pencil 2. also disable any battery optimizing features which can interfere with charging After you’ve made the above modifications, go ahead and try charging your Apple Pencil 2 again and see how things turn out.
Perform a Factory Reset:
However, in case all the other solutions do not work with the problem of charging, you should reset the iPad to its factory setting. A factory reset erases all data and settings from your iPad, putting it back to the factory state. Prior to doing a factory reset, it’s advisable to back up any essential data as you might lose it permanently. To perform a factory reset go to Settings > General > Reset on your iPad and then choose “Erase All Content and Settings.” Follow the prompts on the screen to confirm the reset and begin the process. Proceed with your iPad resetting, set up your iPad as a new device and charge your Apple Pencil 2 again.
Verify Apple Pencil 2 Battery Level:
Check that the battery level of your Apple Pencil 2 is not too low as this could prevent it from charging. To check the battery level you can use the Batteries widget on your iPad’s Home screen. Swipe right from Home screen to open up the Today View. The Batteries widget appears to be scrolled down. If your Apple Pencil 2s battery is low, plug it to your iPad to recharge and track the charging status. When the battery level is unbelievably low, the pencil might take some time to obtain enough charge to turn on.
Reset Apple Pencil 2:
Resetting your Apple Pencil 2 can be used to fix software crashes or glitches which may be among the reasons for the charging problems. To reset your Apple Pencil 2, remove it from the magnetic charging area on your iPad and wait for a while. Next, securely connected the pencil into the charging area and wait for the charging indicator to be displayed on the iPad screen. This simple reset can be a solution which can eliminate any temporary problems and the issue of Apple Pencil 2 charging may be resolved.
Check for Magnetic Interference:
Magnetic interference from the surrounding objects and accessories may terminate the charging process of your Apple Pencil 2. See to it that there are no magnets or magnetic objects to be found around the pencil and iPad while charging. Also remove any cases or covers from your iPad which have built-in magnets, as they may interfere with the magnetic connection between the pencil and the charging area. Magnetic interference elimination ensures stable charging connection and reliable charging performance.
Monitor Charging Temperature:
Extreme temperature can affect charging performance of electronic devices including Apple Pencil 2. To sustain pencil’s performance, ensure you do not expose it to excessively hot and/or cold environments that may accelerate battery degradation and compromise charging efficiency. Ideally, you should charge your Apple Pencil 2 at room temperature to improve charging efficiency and prolong battery life. If you assume that temperature is affecting the charging, go to a better suitable environment and get the charging performance.
Test with Another iPad:
If you have access to another compatible iPad, charge your Apple Pencil 2 with that iPad to see if the problem is specific to the current iPad. Connect the pencil to the magnetic charging area on the alternate iPad and see if its charging. If the pencil works to charge with the other iPad, then the problem lies either with the charging port or the settings of your original iPad. Look further for more troubleshooting or seek help to solve the problem.
Perform a Hardware Diagnosis:
If none of the above steps solves the issue with the Apple Pencil 2, the fault very likely is hardware-related. For hardware diagnostics and repair if required, kindly contact Apple Support or visit an authorized service provider. Apple Support engineers can perform comprehensive tests, inspections and identify underlying hardware issues and provide corresponding solutions. Make sure you have all the symptoms you are experiencing including steps you have tried to fix them.